Charge Plate Monitors Analyzers, Ionizer Preformance Analyzer 288 268A 287 282

Electrostatics Home \| CATV Home \| EAS Home \| Contact Us \| Site Map \| About Monroe

Electrostatic Voltmeters Electrostatic Fieldmeters Charge Plate Monitors Resistance/Resistivity Meters Other ESD Instruments Press Releases Application Notes Manuals for Obsolete Products Links Representatives & Distributors RoHS Statement John Chubb Instrumentation Fieldmeters Static Decay Equipment	Charge Plate Monitors
	288B \| 268A \| 287A \| 282CPS \| 265CPS

		288B Charge Plate Monitor Model 288B is the first charged-plate monitor offering on-board data storage to automate ionization system testing. Use the Model 288B to perform the customary manual tests, or program it to perform a series of automated decay and balance tests. Soft keys simplify the programming and operation of automated tests. Upload test set-ups and ionizer locations. Download stored test results, including environmental data captured by integral temperature and relative humidity sensors. The M M odel 288B uses a novel voltage-follower measurement technique to increase stability, bandwidth, and accuracy, making it ideal for testing the most modern critical-balance ionizers. • NEW Auto Ranging to 0.1V resolution below 100V • NEW Compatible with Monroes New 288B Graphing Software • Test all types of Ionizers • Automated testing reduces ionizer test time and data logging time • Adjustable start and stop voltages for decay test accommodate specialized needs • Large, easy-to-read, high-contrast LCD display • Detachable ion collecting plates can be placed at the work height or placed within process equipment to evaluate ionizers while in use • Small ion collecting plates are available to permit measurements in confined spaces • LED bar graph shows balance voltage in real time Accessories Data Sheet PDF Manual PDF PC Software Download (Version 2.01) PC Software Data Sheet PDF PC Software Operators Guide PDF To Top of Page

		268A Charged Plate Analyzer 268A-1T Charged Plate Analyzer with Adjustable Timer Option The Model 268A is the most affordable charged-plate monitor available. It is suited to test all types of ionization systems according to ESD Association standard S3.1. It features 1 kV and 5 kV charging ranges for testing ionization systems or for testing ESD control materials. It’s ability to display peak positive and negative offset voltage swings make it the ideal tool to quickly and accurately balance pulsed-DC ionization systems. The detachable ion collecting plate can be placed at the work height or placed within process equipment to evaluate ionizers while in use. Model 268A-1T incorporates an adjustable stop voltage for decay tests to accommodate specialized needs. This option allows the user to set the timer stop voltage at any level from 0 V to 1000 V. Data Sheet PDF Manual PDF To Top of Page

		287A Ionizer Preformance Analyzer The Model 287A is a low-cost and highly portable alternative to a charged-plate monitor for periodic verification of ionzer performance. It permits ionizer testing at the work location without the need to remove the ionizer from service for testing. • Manual or automated tests • Optional 6-inch plate attachment (Model 287/22C) achieves1:1 correspondence with standard charged-plate monitor test results • Saves the test results for ten manual tests or ten automated test sequences including environmental data • Integral temperature and relative humidity sensors to capture environmental data during test • Test results correlate to standard tests performed using a charged-plate monitor in accordance with ESD Association standard S3.1 • Intergrates decay timer lacking in ionizer test kits for fieldmeters Data Sheet PDF Manual PDF Manual Supplement PDF Accessories To Top of Page

		282cps Charge Plate System Increase the utility of your Monroe Electronics Model 282 Electrostatic Fieldmeter by adding the 282CPS. The Model 282CPS Charge Plate System is an accessory for the Model 282 Fieldmeter that permits the Model 282 to measure ionizer performance. The 282CPS includes a charge plate attachment for the fieldmeter and a charging source to charge the plate attachment. The fieldmeter then measures the plate voltage during balance and decay tests. • Lowest-cost test method for periodic verification of ionizers • Correlates closely to charged-plate monitor test results • Performs both positive and negative decay tests • Also works with Model 281 Data Sheet PDF Manual PDF To Top of Page

		265cps Charge Plate System Increase the utility of your Monroe Electronics Model 265 Electrostatic Fieldmeter by adding the 265CPS. The Model 265CPS Charge Plate System is an accessory for the Model 265 Fieldmeter that permits the Model 265 to measure ionizer performance. The 265CPS includes a charge plate attachment for the fieldmeter and a charging source to charge the plate attachment. The fieldmeter then measures the plate voltage during balance and decay tests. • Lowest-cost test method for periodic verification of ionizers • Correlates closely to charged-plate monitor test results • Performs both positive and negative decay tests Data Sheet PDF To Top of Page

Monroe Electronics Inc., 100 Housel Avenue, Lyndonville, NY 14098 phone:1-585-765-2254 fax:1-585-765-9330 Copyright © 1999-2012 Monroe Electronics, Inc.