Fieldmeters Static Monitors Static Locator 177A 257D 282 281 265A 289

Electrostatics Home \| CATV Home \| EAS Home \| Contact Us \| Site Map \| About Monroe

Electrostatic Voltmeters Electrostatic Fieldmeters • Selection Chart Charge Plate Monitors Resistance/Resistivity Meters Other ESD Instruments Press Releases Application Notes Links Manuals for Obsolete Products International Distributors Domestic Representatives RoHS Statement John Chubb Instrumentation Fieldmills Static Decay Equipment	Fieldmeters
	177A \| 257D \| 282A & IS \| 282L \| 282M \| 282H \| 281 \| 265A \| 289

		177A STATIC Monitor • Multi-point Fieldmeter and Alarm System • Detect static buildup before it becomes a problem. • Avoid process interruptions, product loss, electrical shocks, fires, and explosions. The Model 177A is the only intrinsically- safe, multiple-channel fieldmeter system available for long-term, unattended monitoring of static levels at critical points within industrial processes. It cost-effectively monitors up to four locations to determine if static control systems are operating effectively, and it warns when static levels exceed safe operating limits, above which material misbehavior, shocks to personnel, explosions, or fires might occur. Several measurement ranges are available. Tailor sensitivity, range, and alarm thresholds to your needs. • Large, easy-to-read LED displays provide instant status of all channels • Two alarm threshold levels warn as each threshold is exceeded • Analog and digital interfaces accommodate process control and data acquisition requirements • Intrinsically safe sensors are approved for use in hazardous locations when used with approved IS barriers • Remote sensors can be located up to 1000 feet from the monitor • Chopper-stabilized measurement technique is drift free, even in ionized environments Data Sheet PDF Manual PDF Modbus Commands PDF Probes and Accessories PC Software Download (ME177A Ver. 1.04a) To Top of Page

		257D PORTABLE Electrostatic Fieldmeter The Model 257D is a portable, battery-operated fieldmeter for performing static surveys or for use as a diagnostic tool when troubleshooting problems caused by static buildup. • Two switch-selectable measurement ranges (2 kV/cm and 20 kV/cm) • Recorder output to pass measurements to auxiliary instruments to display or record the data • Intrinsically safe sensors are approved for use in hazardous locations when used with approved IS barriers • Remote sensors can be located up to 1000 feet from the monitor • Chopper-stabilized measurement technique is drift free, even in ionized environments • An AC adaptor is provided to recharge the batteries and to operate the Model 257D during longer-term tests Data Sheet PDF Manual PDF Probes and Accessories To Top of Page

		282A Digital STAT-ARC 3 282IS Digital STAT-ARC 2IS Intrinsically Safe Fieldmeter for Hazardous Locations Model 282A Digital Stat-Arc 3 and Model 282IS Digital Stat-Arc 2IS are full-featured hand-held fieldmeters used to perform static surveys and evaluate charge accumulation in electronic manufacturing and in industrial operations such as converting, printing, packaging, and plastics processing. • Easy-to-read digital display of field strength provides quantitative data with 100V resolution • LED pulsed beam range finder identifies calibrated distance from the surface • Chopper-stabilized measurement technique works in the presence of ionization • Recorder output to pass measurements to auxiliary instruments to display or record the data • Optional Charge Plate System for testing ionization systems • Model 282IS is UL approved for use in hazardous environments Data Sheet PDF 282A Manual PDF 282IS Manual PDF To Top of Page
		282L 2000 Volt Range Digital Stat-Arc The 2000V Range Digital Stat-Arc, Model 282L is a pocket-sized, non-contacting static meter designed for sensitive, low-voltage measurements which produces consistently accurate readings, and is easy to use. Data Sheet PDF To Top of Page
		282M 20kV/cm Range Digital Stat-Arc The 20kV/cm Digital Stat-Arc, Model 282M is a pocket-sized, non-contacting static meter which produces consistently accurate readings, and is easy to use. Data Sheet PDF To Top of Page
		282H 200kV Range Digital Stat-Arc The 200kV F.S. Digital Stat-Arc , Model 282H is a pocket-sized, non-contacting static meter which produces consistently accurate readings, and is easy to use. Data Sheet PDF To Top of Page

		281 STATIC Locator Model 281 is ideal for those looking for the most important features in a fieldmeter at a very reasonable price .• Easy-to-read digital display of field strength provides quantitative data with 100V resolution • HOLD button to retain measurements made in hard-to-read locations • Battery SavR™ turns the fieldmeter off when not in use Data Sheet PDF Manual PDF To Top of Page

		265A STATIC Locator Model 265A is perfect for technicians and engineers who want an analog display of field strength. The dual-range analog display is ideal for observing locations where field strength changes rapidly, such as when measuring moving webs or when measuring charged parts moving past the fieldmeter. • Recorder output to pass measurements to auxiliary instruments to display or record the data • Chopper-stabilized measurement technique works in the presence of ionization • Optional Charge Plate System for testing ionization systems Data Sheet PDF To Top of Page

		289 STATIC Locator The Model 289 is ideal for those who need to make qualitative static surveys at the most affordable price. It features a high-speed LED bar graph that quickly shows the magnitude and polarity of the static charge. A simple-to-operate zero button and conductive case (for obtaining a ground connection) help to make this one of the easiest instruments you will ever operate. Data Sheet PDF To Top of Page


Monroe Electronics Inc., 100 Housel Avenue, Lyndonville, NY 14098 phone:1-585-765-2254 fax:1-585-765-9330 Copyright © 1999-2007 Monroe Electronics, Inc.